본문 바로가기
저장소

갤럭시 넥서스 스마트폰 터치해서 깨우기 설정(트릭스터 모드 어플리케이션) Wake up smart phones by touch Setup (trickster mode Application) GALAXY NEXUS

by 통합메일 2013. 12. 10.
반응형

최근에 나온 LG의 옵티머스G2를 구경해보니 외부에 물리적인 전원 버튼이 없습니다.

스마트폰을 켤 때는 LCD화면을 손가락으로 두번 터치하면 되더군요.

참 신기한 기능이라고 생각했는데, 얼마전에 갤럭시 넥서스도 비슷한 기능을 구현할 수 있다는 것을 알게 되었습니다.

다른 스마트폰의 경우에는 어떨지 모르겠습니다. 아마 될 것 같아요.

물론 이 기능을 사용하기 위해서는 특별한 Kernel이 필요할 수 있습니다.

그리고 제가 여기에서 말하는 기능은 G2의 기능과 완전히 동일한 것은 아닙니다.

테스트 해본 결과 이 방법으로는 스마트폰의 display time out이 되어서 꺼졌을 경우에만 작동을 합니다.

즉, 전원버튼을 사용해서 스마트폰을 끄는 것이 아니라, 시간이 지나 자동으로 꺼졌을 경우에만 작동을 하는 거죠.


This last visit LG's Optimus G2 haeboni physical power button is not on the outside.

When you turn on your smartphone LCD touch screen with your finger you get this twice.

I really think that strange features, the Galaxy Nexus some time ago that you can implement a similar feature has been found.

I do not know about the case of the other smart phones. I think it would be probably.

Of course, in order to use this feature you may need special Kernel.

And I speak here of the capabilities and features of the G2 is not exactly the same.

In this way, the test revealed that the smartphone is the display time out to be the only works if turned off.

In other words, by using the power button to turn off the smartphone, instead of automatically over time, that only works if you're turned off.









제 스마트폰의 <휴대폰 정보>입니다.

여기서 중요한 것은 Kernel입니다.

FuguMod라고 해서, 이 바닥에서는 흔히 복어 커널이라고 부릅니다.

필요한 분들을 위한 링크 http://cafe.naver.com/grnf/105247

이 기능을 사용하기 위해서는 이러한 기능을 지원하는 커널을 사용해야 합니다.

그리고 이 기능은 스마트폰의 Root 권한을 필요로 하기 때문에 Rooting이 되어 있어야 할 것 같습니다.


주의: 위에 링크된 커널은 갤럭시 넥서스 기종에 특화된 것이기 때문에 다른 기종에 사용할 경우 고장의 원인이 될 수 있습니다.



My smartphone <phone> is.

Kernel is important here.

I FuguMod to, the floor is often referred to as fugu kernel.

Links for those who need http://cafe.naver.com/grnf/105247

In order to use this function, you should use this function is supported by the kernel.

And this feature of the smart phone because it requires Root Rooting authority seems to have become.


Note: The above links specific to the kernel of the Galaxy Nexus models used in other models, because it may damage your case.





그리고 트릭스터모드(Trickster MOD Kernel Settings)라는 어플리케이션이 필요합니다.

And trickster mode (Trickster MOD Kernel Settings) the application is required.




이 어플을 실행해서 오른쪽으로 탭을 넘기다보면 특정(Special)이라는 탭이 나옵니다.

여기에 보면 <터치하여 깨우기>라는 메뉴가 있습니다.

이 부분을 활성화시키면 스마트폰이 자동으로 꺼졌을 경우, 위에서 정해놓은 딜레이(초) 30초 안에서 화면을 터치하는 것으로 스마트폰의 화면을 켤 수 있게 됩니다.


Run this application to turn over to look at the right side of the tab-specific (Special) that tab will appear.

Look here <touch to wake> the menu.

This part of the smart phone will automatically activate if turned off, the above set by the delay (in seconds) within 30 seconds by touching the screen of the smartphone will be able to turn on the screen.






<추가 기재>

포스트를 하고 조금 더 뒤져보니 부팅될 때 자동으로 설정이 실행되도록 해서 커널 설정이 풀리지 않도록 할 방법이 있더군요.

<Add described>

Looked a little more behind the post automatically when you boot up the kernel configuration to run setting can not be solved this way though.





시간 toggle의 ON/OFF 여부 역시도 중요한데, 이 toggle을 OFF로 해놓으면 Time out display OFF일 때 뿐만 아니라, 전원 버튼으로 스마트폰 화면을 끄는 경우에도 <터치로 깨우기> 기능이 작동을 합니다. 이 toggle을 ON으로 해놓으면 Time out display OFF일 경우에만 <터치로 꺠우기> 기능이 작동을 하게 되는 것이고요.

설정을 한 뒤에 상단에 있는 체크 버튼 눌러서 적용시키는 거 잊지 마시기 바랍니다.

그런데 이렇게만 설정을 해버리면 스마트폰을 재부팅했을 때 설정이 풀려 Reset이 되어버려서 다시 Trickster Mod application으로 들어가서 설정을 해줘야 하는 번거로움이 있습니다. 이제 이것을 해결하는 작업을 살펴보도록 하겠습니다.


Time toggle the ON / OFF Status also important, is the toggle to OFF Time out display OFF when released, as well as the power button to turn off the screen if the smartphone is <touch Wake> feature operation. When you release the toggle to ON only if Time out display OFF <kkyae touch wet> functions with which we're working.

After setting, press the Apply button at the top of the check, please do not forget.

This setting only way to reboot Haverstraw punt set when the smartphone is unlocked Reset Trickster Mod application has been disposed of to go back to the hassle of setting can earn yourpassage. Now let's take a look at the task of solving this.




Trickster Mod application에서 설정하고 체크버튼으로 적용까지 한 다음, 그 옆에 있는 설정 아이콘을 눌러서 설정창을 엽니다.

거기서 <커널 설정> 옵션에 체크를 해주시면, 부팅 할 때마다 지금의 커널 설정이 자동으로 적용이 됩니다. 그럼 부팅할 때마다 다시 설정을 적용해줄 필요가 없겠죠? 


Trickster Mod application button to apply the settings and to check, then press the Settings icon next to it to open the settings window.

Where <kernel config> option to your account Login to check, so every time you boot the kernel settings are automatically applied. So every time you boot the reset would not will need to apply?




테스트를 해보니 위와 같았습니다.

재부팅하면서 커널 설정이 자동으로 적용이 되네요.


A test was the same as above.

Reboot the kernel settings are automatically applied to the sense.


NOTE: 저만의 경우인지는 모르겠지만, 그리고 이 설정 탓인지는 모르겠지만 가끔 재부팅을 했을 때 전원버튼을 눌러서 화면이 켜지지 않을 때가 있습니다. 그럴 때는 보통 배터리를 분리해서 다시 켜는 방법이 일반적인데, 배터리를 분리하기 전에 전원버튼+볼륨 up 버튼 + 볼륨 down 버튼을 동시에 눌러보세요. 저의 경우에는 이상하게도 그렇게 하니까 화면이 켜져서 정상적으로 다시 재부팅 하니까 해결이 됐습니다.


NOTE: I do not know if my own, and I do not know if this setting because sometimes when you reboot by pressing the power button does not turn on the screen sometimes. When that happens, remove the battery and turn it back on usually are generally, which before removing the battery + power button + volume up button, volume down button at the same time now. Strangely enough, because if you do, my screen is turned on again, reboot normally resolved Own! Because.


반응형

댓글